Bad Train
1790 €
The famous boutique wrecked amp is back.
Build to Order.
Building time : approx 1.5 months months.
Available on backorder
Bad train
Features
True dynamic technology
The Bad Train introduce the new True dynamic technology. These are exclusive specially designed circuit to improve the response of the amplifer to your right hand playing. The result is a super touch sensitive sound, very reactive to your playing, just like a big stack driven to full blast. So now your Fx amplifier not only provide fantastic sounds even at very low levels, but you’ll also get the true feeling of a pushed 100w amplifier.
Quiet play
The Bad Train has the special « ultralinear master volume » technology, designed to play at any level, even at very low level at night. That master volume is very progressive, and easy to set even at low level. There is no jump in level like with a typical master volume, and it remains progressive until the end of the course. The amp also has a 20w/2w for the most quiet conditions, with a slight frequency correction in 2w mode to compensate for the bright response of some speakers at low level.
No Bias System
Change your tubes yourself, at home, no equipment needed. Freely choose between 6L6 and EL34 power tubes, you can even mix a 6L6 and an EL34. Procedure is quick, easy, and without risk. This will save you hundreds in maintenance every year, and will allow you to test many tube brands and combinations.
Smart connections
The head version (and reverse head) features two speaker outputs in parallel, along with a 4/8/16 ohms impedance selector. This allows a variety of possible connections, with one or two cabinets from various impedances.
The combo version offers exactly the same outputs, and the speaker is externally connected (cable included). This allows for multiple smart connections. You can use the internal speaker alone, internal speaker + external cabinet, one external cabinet only, two external cabinets. It also allows the use of an attenuator with internal speaker or external cabinet, and the use of a loadbox for silent recording. Finally you can also use the combo as a cabinet for an external amplifier (In that case, turn off the amplifier section of the combo!!!)
DC tube heating
Heating tubes with DC current is quiter than the usual AC wiring. It takes more time to wire, and it’s a little bit more expensive, but it’s really worth it. Your Fx amplifier is guaranteed to be as quiet as possible.
Specifications
Finish : Customers choice
Controls : Gain/Bass/Mid/Treble/Volume + bright + Deep + Loud/quiet
Features : Tube buffered effect loop, 16/8/4 ohms selector + 2x speaker outputs.
Power : Single ended, Class A, 20w switchable to 2w. Available in 115v or 230v.
Tubes : 3x 12ax7 + 2x EL34. User swappable/mixable EL34/6L6 power tube, no bias needed.
Construction : Point to point, handwired.
Dimensions : 50cm wide, 22cm high, 21cm deep & 13kg
Recommended speaker : Celestion Alnico Gold (Fxamps 1×12″ classic).
Videos
Some amps we built
Reviews
There are no reviews yet.